Professional Supplier for 500mm Dia UHP Graphite Electrode
HomeHome > Products > 500mm Graphite Electrode > Professional Supplier for 500mm Dia UHP Graphite Electrode
Professional Supplier for 500mm Dia UHP Graphite Electrode

Professional Supplier for 500mm Dia UHP Graphite Electrode

Products Detail:Graphite electrode refers to a kind of high-temperature resistant graphite conductive material, which is
Basic Info
Model NO. graphite electrode-04
Product Name Graphite Electrode
Material Petroleum Coke
Resistance (μΩ.M 4 - 9 Micro
Nipple 3tpi/4tpi/4tpil
Length 1600~3000mm
Apparent Density (G/Cm³ ) 1.58 - 1.76 G/Cc
Application Smelting Steel
Transport Package Regular or According to Customer Requirements
Specification Regular or according to customer requirements
Trademark FK
Origin China
HS Code 8545110000
Production Capacity 5000mt/Month
Product Description
Products Detail:Graphite electrode refers to a kind of high-temperature resistant graphite conductive material, which is made ofpetroleum coke and asphalt coke as aggregates and coal tar pitch as binder through raw material calcination,crushing and grinding, batching, kneading, molding, baking, impregnation, graphitization and mechanical processing.It is called artificial graphite electrode (graphite electrode for short), to distinguish it from natural graphite electrodeprepared with natural graphite as raw material.

Processing Program:

1) The graphite is immersed in oil. Before machining,
the graphite material should be immersed in the engine
oil for tens of hours to make the oil penetrate into the
graphite material, so that the ash powder will not fly
during machining and a smooth surface can be obtained.

2) Paint scribing. After the electrode is rough machined
on the contour surface, a thin layer of white paint shall be
sprayed on the scribing surface before scribing, so that
the lines are clear and convenient for machining.

3) Perform machining.

Application:

(1) For electric arc steelmaking furnace

(2) For submerged arc furnace

(3) For resistance furnace

(4) Used to prepare special-shaped graphite products

Professional Supplier for 500mm Dia UHP Graphite Electrode

ITEMPRHPUHP
Electric Resistivity(μΩ·m)≤8.0≤7.0≤6.2
Bending Strength(MPa)≥10.0≥10.5≥10.5
Elestic modulus(GPa)≤12.0≤12.0≤14.0
Bulk Density(g/cm3)≥1.66≥1.62≥1.58
Coefficient of Thermal Expansion(X10-6/ºC)≤2.7≤2.4≤1.5
Ash(%)≤0.3≤0.3≤0.3

Form of processing:

There are mainly three types of graphite electrode machining: pressurized vibration method, CNC automatic forming method and
mechanical processing method.

(1) Pressurized vibration method: the pressurized vibration method requires a special machine tool, and the shape of the electrode
master mold is opposite to that of the electrode. Graphite materials and forming tools are placed relatively during processing, leaving
a certain gap. The processing fluid composed of water and abrasive is injected into the machine. At the same time of passing through
the processing fluid, the graphite and the forming tool are subject to ultrasonic vibration. Under the action of abrasive impact force,
the graphite is stripped to the required shape. The abrasive is SiC, B4C or diamond. The rougher the abrasive is, the faster the
machining speed is. When the machine tool is working, it adopts sealed type and water curtain type for processing. It is suitable for
EDM for mass production.

(2) Numerical control automatic forming method: the numerical control automatic forming method requires a special graphite electrode
forming machine, which adopts the numerical control method, has an automatic tool exchange device, and can accommodate multiple
tools. In order to improve the processing environment, the graphite electrode is surrounded by a water curtain to prevent the graphite
dust from dispersing everywhere. In addition, the wet machining method can also be used to prevent tool wear and graphite dust
dispersion by using water-soluble cutting fluid. The machine tool has a high-performance filtering device, which can separate the
cutting fluid from the graphite chips, and can ensure continuous processing for a long time. It is an ideal special equipment for
graphite electrode processing, and is suitable for electrode processing for moulds. However, its price is relatively high and it is
not widely used in China.

(3) Machining method: the machining method is the main method adopted by domestic general mold manufacturers.
Graphite Electrode
ProjectNominal diameter mm
75~130150~225250~300350~450500~800
LevelExcellent-Excellent-Excellent-Excellent-Excellent-
Resistivity μΩ·m ≤Electrode8.510910.5910.5910.5910.5
Nipple88888
Flexural strength MPa ≥Electrode1010876.5
Nipple1515151515
Elastic Modulus GPa ≤Electrode9.39.39.39.39.3
Nipple1414141414
Bulk density g/cm3 ≥Electrode1.581.531.531.531.52
Nipple1.71.71.71.71.7

Thermal expansion coefficient 10-6/ºC

Room temperature

~600ºC ≥

Electrode2.92.92.92.92.9
Nipple2.72.72.82.82.8
Ash content % ≤0.50.50.50.50.5

Company Profile:

Professional Supplier for 500mm Dia UHP Graphite Electrode


FAQ:Q: Are you a trading compnay or manufacture?
A: We're factory
Q:How long is your delivery time?
A: Generally it will need about 15-20 days if the goods are not in stock.
Q:Do you provide samples?
A: Yes, we could provide the stock free sample, buyer only pay the freight cost.
Q:What is the main customers?
A:The main customers are from all over the world.