Ordinary Power RP Graphite Electrode 300mm 350mm 400mm

Basic Info

Specification	SGS
Trademark	FK
Origin	China
HS Code	8545110000
Production Capacity	50000kg/Day

Product Description

Graphite Electrodes are a high temperature resistant graphite conductive refractory material used in the metallurgical industry. Graphite Electrodes are made of petroleum coke, bituminous coke as aggregates, coal tar pitch as binders, after raw material calcination, crushing and milling, batching, kneading, molding, roasting, impregnation, graphitization and machining, which are also known as artificial graphite electrodes in order to distinguish from natural graphite electrodes made of natural graphite.

> Be careful when transporting and pilling electrodes with forklift and avoid of collision. One layer of goods at a time; notice the balance and alignment and avoid falling or breakage.

> When loading and unloading with forklift, wire rope must be used and steel wrapping tape cannot be employed directly to fetch electrodes.

> Electrode should be stored in clean and dry place. When pilling up outdoors, it should be covered with rain-proof tarpaulin and the number of piling layers ought not to exceed four.

> When using electrodes, special tools should be employed to cut the steel wrapping tape, and crane should not be adopted to avoid bursting.

> Steel-wire ball, metallic brush or emery cloth is not allowed for cleaning the electrode thread, but compressed air free of oil and water is available.

> Use revolved resilient hanger and put soft truss pad under the electrode joint to avoid breakage of the thread.

> Lift the electrode to the furnace by using a hoister with resilient hangers, and find out the center and move slowly downwards, screw and tight with a hoop.

> If the two poles of the two electrodes are untouched or touched in overpressure, this may cause bad effect.

> In order to avoid electrode breakage, put the large materials in lower part and small materials in the upper part.

Detailed Photos

Product Parameters

RP	HP	UHP
Electrode: Bulk Density≥ 1.56g/cm3 Specific Resistivity≤ 8.5μm Bending Strength≥ 10.0MPa Elastic Modulus≤ 9.3GPa Thermal Expansion Coefficient≤ 2.7x10 -6/°C Ash≤ 0.5% Nipple: Bulk Density≥ 1.68g/cm3 Specific Resistivity≤ 7.0μm Bending Strength≥ 14.0MPa Elastic Modulus≤ 13.7GPa Thermal Expansion Coefficient≤ 2.5 x10 -6/°C Ash≤ 0.5%	Electrode: Bulk Density≥ 1.65g/cm3 Specific Resistivity≤ 6.5μm Bending Strength≥ 12.0MPa Elastic Modulus≤ 10.0GPa Thermal Expansion Coefficient≤ 2.2x10 -6/°C Ash≤ 0.3% Nipple: Bulk Density≥ 1.74g/cm3 Specific Resistivity≤ 5.5μm Bending Strength≥ 16.0MPa Elastic Modulus≤ 14.0GPa Thermal Expansion Coefficient≤ 2.0 x10 -6/°C Ash≤ 0.3%	Electrode: Bulk Density≥ 1.68g/cm3 Specific Resistivity≤ 5.8μm Bending Strength≥ 16.0MPa Elastic Modulus≤ 14.0GPa Thermal Expansion Coefficient≤ 1.9x10 -6/°C Ash≤ 0.2% Nipple: Bulk Density≥ 1.76g/cm3 Specific Resistivity≤ 4.5μm Bending Strength≥ 18.0MPa Elastic Modulus≤ 16.0GPa Thermal Expansion Coefficient≤ 1.4 x10 -6/°C Ash≤ 0.2%

Actual diameters					Actual lengths
Mm	Mm	MAX	MIN	Rough spot	Length	Tolerance	Shot Ruler size
200	8	204	201	198	1600	±100	-275
250	10	256	252	248	1600 1800
300	12	307	303	299
350	14	357	353	347
400	16	409	404	400	1600 1800 2000
450	18	460	455	451
500	20	511	506	502
600	24	613	607	604
780	31.2	782	776	774	2000 2200 2400	±100	-400
800	32	802	796	794
870	34.8	872	866	862
900	36	902	896	892
920	36.8	922	916	912
960	38.4	962	956	952
1020	40.8	1022	1016	1012	2200 2600 2800
1060	42.4	1062	1056	1052
1100	44	1102	1092	1092
1146	45.8	1148	1140	1138
1197	47.9	1199	1191	1189
1250	50	1252	1244	1242
1272	50.9	1274	1266	1264
1305	54.4	1307	1299	1297
1321	52.8	1323	1315	1313
1400	56	1402	1394	1392

Company Profile
Hebei Fangke New Material Technology , was founded on May 29th, 2000 in Hebei, is the largest high-tier lubricant manufacturer and marketer in China with a production capacity of over 1.46 million tons of packaged lubricants per year. Many more sales subsidiaries all over the world, , , It integrates the function of lubricant manufacturing, research, storage, transportation, sales and service.

 

Production Facilities

 

Quality Assurance & Control
· National Certified Laboratory· Key testing instruments, including: specific resistor, bulk density meter, elasticmodulus meter, bending strength inspector, ash analysis meter, CTE analysis meter, etc.· On-time instrument calibration· On-site properties testing, including: L-CTE,C-CTE Specific resistance, bulk density, Bending strength, ash content, elastic modulus
Technical Specifaication:

Item		Unit	RP		HP		UHP
			250-400	450-800	300-400	450-700	300-400	450-700
Electric Resistivity	Electrode	μΩ.m	7.5-8.6	7.5-8.8	5.5-6.8	5.5-7.0	4.6-6.0	4.8-6.2
	Nipple		4.5-5.5		4.0-5.0		3.5-4.5
Bending Strength	Electrode	Mpa	≥8.0		≥11.0		≥11.0
	Nipple		≥15.0		≥16.0		≥18.0
Elastic Modulus	Electrode	Gpa	≤9.0		≤11.0		≤13.0
	Nipple		≤13.0		≤14.0		≤15.0
Bulk Density	Electrode	g/cm3	1.55-1.65		1.63-1.73		1.65-1.75
	Nipple		1.70-1.75		1.73-1.80		1.75-1.82
Ash	Electrode	%	≤0.3
	Nipple
CTE(100-600)ºC	Electrode	10-6/ºC	2.00-2.50		1.80-2.00		1.30-1.50
	Nipple		1.50-1.80		1.50-1.80		1.20-1.40

Current Carrying Capacity

Nomina diameter		RP		HP		UHP
		Current Carrying Capacity	Current Density	Current Carrying Capacity	Current Density	Current Carrying Capacity	Current Density
in	mm	A	A/cm2	A	A/cm2	A	A/cm2
12	300	10000-13000	14-18	13000-17400	17-24	15000-22000	20-30
14	350	13500-18000	14-18	17400-24000	17-24	20000-30000	20-30
16	400	18000-23500	14-18	21000-31000	16-24	25000-40000	19-30
18	450	22000-27000	13-17	25000-40000	15-24	32000-45000	19-27
20	500	25000-32000	13-16	30000-48000	15-24	38000-55000	18-27
22	550	32000-40000	13-16	35000-55000	14-22	42000-64000	17-26
24	600	35000-41000	13-15	41000-61000	14-21	50000-73000	17-25
28	700	39000-48000	10-12	55000-82000	14-21	67000-99000	17-25
32	800	43000-54000	8-10	/	/	/	/

 

FAQ
Q:Are you a trading company or manufactureA;FK is a large-scale central governmental industrial group with its own manufacturing sector, research and development sector, trading sector and logistics sector
Q:I have some special requirement about specifications.A:We have a well-rounded product range, which endows us with the capability of applying many special specifications. Please feel free to contact us with yours
Q:Do you accept OEM service?
A:Yes, we do
Q:What is your delivery time?
A:It depends on the size/complexity of your order and our own production schedule. Usually we provide a faster delivery than the industry's average
Q:What is the payment term?
A:Our payment terms are negotiable
Q:Can I have my own logo on the product?
A:Sure, we can apply your own logo on the products according to your requirement.